There may be other possibilities that I didn't list.Note that here I'm just using one component of the scale vector (z) because I'm assuming that any rescaling being done is being applied uniformly across all 3 axes. = .transform.position + NeckPosition * .z At the bottom of SetCameraOrientation(), there are two statements that update the camera's position using neck and eye position (which includes the x offsets for your stereo separation), and you'll want to update those to account for the camera's effective scale:

Is your camera inside a hierarchy of gameobjects that has been collectively scaled to something other than 1.0? If that's the case and you need to keep it that way, you'll want to modify OVRCamera.cs a tiny bit.

With high separation the cartridge will produce a wide sound stage. It tells us about the degree of stereo that can be achieved. Is your in-game 'avatar' at the correct height above the ground? If there is a mismatch between your IPD and height that could also cause it to feel odd since it's differen than what you're used to. This is the amount of separation between the two stereo channels, or how much right channel is in the left, and vice versa.Do you need to adjust the IPD to more closely match your own? (To adjust you can either set the IPD by script using the camera controller component's SetIPD() method, or if you have an OVRMainMenu in your scene, you can use the = and - keys to adjust it in-game.).Is the you have world scaled such that 1 meter = 1 Unity unit?.Now, if it feels off, here's a few things I can think of to check: Back when tape machines and physical mixers were used, a stereo source was recorded to two separate tracks and brought back through two separate channels, one channel usually panned left and the other right.

Turn a knob all the way to the right, to convert a stereo. Their X position values will be + and - half of the IPD, which by default is 64mm (so in Unity units 0.064), so you'll see CameraLeft's x pos is -0.032, and CameraRight's x pos is 0.032. A stereo 'track' is actually two tracks represented as one. Now when you send a sound to a mixer channel, you can use the Stereo Separation Knob of that channel. The stereo separation in the Unity integration comes from the actual positioning of the two cameras that belong to the OVRCameraController.

What is stereo separation